Safety devices 6 point competition bolt-in  roll cage kit offered by stable energies includes: bolt on door bars, harness bar and diagonal. Optionally, the diagonal is offered in a non-removable version. Please refer to the part number to specify correctly when ordering. The bolt on harness bar is offset towards the rear to allow full movement of the front seats. This harness bar also incorporates shoulder harness guides which locate the shoulder harnesses on the harness bar. For the club racers, a seat back brace can be attached to the harness bar as well.
The most obvious advantages with safety devices is the tight fitment to the interior and proper mounting points. The mounting points are typically to the ...(choose a part on the right to read more)

General Fitment

2 1/4 inch (58mm ) tubing diameter / stainless steel

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

General Fitment

Safety devices 6 point competition bolt-in  roll cage kit offered by stable energies includes: bolt on door bars, harness bar and diagonal. Optionally, the diagonal is offered in a non-removable version. Please refer to the part number to specify correctly when ordering. The bolt on harness bar is offset towards the rear to allow full movement of the front seats. This harness bar also incorporates shoulder harness guides which locate the shoulder harnesses on the harness bar. For the club racers, a seat back brace can be attached to the harness bar as well.
The most obvious advantages with safety devices is the tight fitment to the interior and proper mounting points. The mounting points are typically to the ...(choose a part on the right to read more)

General Fitment

Clewett engineering high performance ignition wires are 8mm, with a 2 layer silicone jacket, inside a 1200 degree protective sleeve. This spiral core, resister conductor wire provides emi/rfi suppression for all ignition and engine management systems. These wires are a great choice for racing or street applications. Red and black are standard colors.

Please indicate desired color when ordering. If no color is chosen it will default to red.

General Fitment

If you can see sparks jumping around the engine compartment on a dark night, you need a wire set. easily installed, order four spark plugs while you are at it. Includes coil wire.

General Fitment

7 mm copper core wire set. This set has four short spark plug connectors. Available in black, blue, and red; please indicate color choice when ordering.

These wires fit these specific models:

924s 1986-88 l4 2.5
944 1983-89 l4 2.5, 2.7
944 turbo 1986-89 l4 3.0 m44.41 turbo

General Fitment

Reduce shifter slop in your 924 or 944 by replacing worn shifter parts. To check wear, simply pull up your shifter boot and inspect the shaft on the side of the shifter for wear. Also, check for a cracked or worn bushing under the shifter.


Known as: gearshift lever

View/Change Diagram

924 1976-79 - Pedal System/Levers	924 1980-85 - Pedal System/Levers
924 1986-88 - Pedal System/Levers	944 1982-85 - Pedal System/Levers
944 1985-88 - Pedal System/Levers	944 1989-91 - Pedal System/Levers

English an official Porsche publication. Each book is approximately 100 pages and details the complete specifications of the models listed. Gives wear limits: torque specs, body and engine serial numbers - vital for rebuilds or restoring.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

English an official Porsche publication. Each book is approximately 100 pages and details the complete specifications of the models listed. Gives wear limits: torque specs, body and engine serial numbers - vital for rebuilds or restoring.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

The K&N filter charger air filter is designed to achieve high, virtually unrestricted air flow while maintaining filtration levels critical to ensure long engine life. Our automotive oe (original equipment) replacement air filters generally add 1-4 horsepower. Sold individually. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

English an official Porsche publication. Each book is approximately 100 pages and details the complete specifications of the models listed. Gives wear limits: torque specs, body and engine serial numbers - vital for rebuilds or restoring.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Inlet cams:
Cam lift (valve lift) i/e (mm) = 10.7 mm
Duration°/peak timing = 280°/127-102°
Valve timing °cra (io-ic-eo-ec) = 13-87 38-62
Valve lift at tdc i/e (mm) = 0.4-3.2mm

Outlet cams:
Cam lift (valve lift) i/e (mm) = 10.7 mm
Duration°/peak timing = 272°/113°
Valve timing °cra (io-ic-eo-ec) = 69-23
Valve lift at tdc i/e (mm) = 1.5mm



This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

King pin angle 112 degrees, valve lift 11,8mm hub 2,7 timing eo/es 34/78 ao/as 78/34

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

General Fitment

This heat exchanger is engineered for the discerning Porsche 911 owner. Ssi heat exchangers are made from superior t 304 grade (18% cr, 8%+ ni) stainless steel. Ssi has become an industry standard for Porsche 911 heat exchangers due to the exceptional materials, craftsmanship and durability. This is critical when considering heat exchangers, as exhaust leaks caused by poor materials can lead to carbon monoxide entering the cabin via the heating system. Features: t304 stainless steel (18% cr, 8%+ ni) backpressure reduction bolt on replacement reduces the thermal load on the motor sold individually. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once orde...(choose a part on the right to read more)

This heat exchanger is engineered for the discerning Porsche 911 owner. Ssi heat exchangers are made from superior t 304 grade (18% cr, 8%+ ni) stainless steel. Ssi has become an industry standard for Porsche 911 heat exchangers due to the exceptional materials, craftsmanship and durability. This is critical when considering heat exchangers, as exhaust leaks caused by poor materials can lead to carbon monoxide entering the cabin via the heating system. Features: gains of +10-15 hp and +10-20 tq t304 stainless steel (18% cr, 8%+ ni) increased pipe diameter for backpressure reduction connects to "early style" dual inlet mufflers bolt on replacements reduces the thermal load on the motor includes custom torque w...(choose a part on the right to read more)

The K&N filter charger air filter is designed to achieve high, virtually unrestricted air flow while maintaining filtration levels critical to ensure long engine life. Our automotive oe (original equipment) replacement air filters generally add 1-4 horsepower. Sold individually. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

The K&N filter charger air filter is designed to achieve high, virtually unrestricted air flow while maintaining filtration levels critical to ensure long engine life. Our automotive oe (original equipment) replacement air filters generally add 1-4 horsepower.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Genuine set of plush velour floor mats with nubuck edging that is custom tailored for your Porsche. Each is cut, sewn and trimmed to fit perfectly. They include a non-slip and waterproof rubber backing and are secured with a new updated fastening system. Limited availability due to color. If you don't see the color you require please contact an FVD parts specialist. Please note: these are for left hand drive models only.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

If you have a us model 1980-83 911 SC and are looking to replace your heat exchangers we have some good and bad news. The original heat exchangers (part # 930 211 025 02) are no longer available from Porsche. But, these stainless-steel industries (ssi) heat exchangers will work with modifications. The good news is, once done, you will have more torque and horsepower! Free flow conversion heat exchangers improve sound and performance, while reducing backpressure and thermal load on the motor. These are based off the early style exhausts found on the 1974 2.7 l rs. Those models had a straight through, superior, free flow exhaust design that included a dual inlet muffler. When converting to these heat exchangers y...(choose a part on the right to read more)

This is the part that attached the rocker shafts to the head. They are very odd sized with a 7mm nut securing the rocker arm to the head. eight required, order valve cover gaskets and the 7mm nuts at the same time and inspect the valve adjusting lugs for damage.

View/Change Diagram

911 1974-77 - Engine

914 1970-76 - Engine

This harness is used to retrofit halogen headlights to litronic headlights. Sold individually. 2 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.